48V E-Bike 58V 6A Lead Acid Charger

The YZ600 at 58V and 6A (348W) for 48V lead-acid systems, in a compact body sized for motorcycles and scooters.

Technical specifications
Input Voltage100-240V AC
Output58V 6A
Efficiency>88%
ProtectionOVP/OCP/SCP/OTP

Overview

The YZ600 at 58V and 6A - 348W - for 48V lead-acid systems, in a compact body for motorcycles and scooters.

Which packs this charger suits

48V lead-acid, 24 cells: 57.6-58.8V absorption, and 58V sits in that range. At 6A it suits smaller packs and motorcycle or scooter batteries.

For lithium, 14S needs 58.8V and 16S LiFePO4 58.4V, on a CC/CV profile this unit does not run.

Specifications

48V E-Bike 58V 6A Lead Acid Charger - detail view 1

Model Comparison

58V / 6A for 48V lead-acid systems, in a compact body for motorcycles and scooters. If the pack is 48V LiFePO4 rather than lead-acid, the YZ600 is also available at 58.4V / 10A.

Connectors and plugs

What 58 V means on a 48 V lead-acid pack

A 48 V lead-acid battery is 24 cells in series at 2 V nominal each. Absorption sits at 2.40-2.45 V per cell, which is 57.6-58.8 V across the string, and 58 V sits inside that window - set for the band the battery maker specifies rather than for its top edge.

6 A in a compact body

6 A is a small current in a small case, which is what motorcycle and scooter battery compartments leave room for. A 20 Ah battery is about three hours at full current, a 40 Ah about seven, each plus the taper. For a vehicle that charges between rides this is the right shape and the right rate.

Why not the 10 A version

Same chemistry, same 48 V class, more current. The 10 A build is the one to specify when a pack has to be back in service the same day or when several vehicles share a charger. At 6 A the trade is size and cost against time.

It is not a lithium charger

A 14S lithium-ion pack charges at 58.8 V and a 16S LiFePO4 pack at 58.4 V, both on CC/CV with a hard finish voltage. This unit runs a lead-acid profile - absorption then taper. The numbers are close enough to look interchangeable on paper, which is exactly why they get mixed up. The YZ600 is also built at 58.4 V / 10 A for the LiFePO4 case.

SLA, AGM and gel

All three sit in the same 57.6-58.8 V absorption window, so one charger covers a workshop with mixed battery types. Where the battery maker publishes a lower maximum - some gel types do - check that figure against 58 V before ordering.

Ratings

Input 100-240 V AC. Output 58 V at 6 A. Efficiency above 88%. Protection: over-voltage, over-current, short-circuit and over-temperature.

MOQ / lead time / warranty · 1 unit · 10-15 working days · 1 year

FAQ

Why 58 V and not 58.8 V? 58.8 V is the top of the 24-cell band. 58 V sits inside the same band and leaves margin at the top.
Can it charge a 48 V lithium pack? No. 14S needs 58.8 V and 16S LiFePO4 58.4 V, both on a CC/CV profile this unit does not run.
Is 6 A enough for a 100 Ah battery? That is a long charge, over sixteen hours plus taper. It suits smaller packs and short-duty vehicles.

About YZPOWER

58V 6A Lead Acid Battery Charger (48V)

Related models

Other chargers built for the same battery system, from the same factory: