The highest-current 12V unit we build: 180A, with voltage and current both adjustable, for high-capacity banks in camping, off-grid and solar storage.
| Input Voltage | 100-240V AC |
|---|---|
| Output | 14.6V 180A |
| Efficiency | >88% |
| Protection | OVP/OCP/SCP/OTP |
The YZ3000 is the highest-current 12V unit we build: up to 180A, with adjustable voltage and current. Made for high-capacity 12V banks - camping, off-grid and solar storage.

The highest-current unit we build: up to 180A into 12V banks, with adjustable voltage. In the same range the YZ1000 delivers 60A and the YZ800S 40A — the YZ3000 is for the largest camping and storage-energy banks.


180 A into a 12 V bank is roughly 2.6 kW of output. Nothing else in the range comes close: the YZ1000 delivers 60 A and the YZ800S 40 A. This unit exists for banks where a full charge inside a working day is the requirement, not a preference.
At 2.6 kW output the supply matters more than the charger. On 120 V that is roughly 24 A before efficiency losses, which is beyond a standard 15 A branch circuit - so a 120 V site usually needs a dedicated circuit, and a 240 V site is the natural fit. Confirm the supply at the destination before ordering; it is the one specification that cannot be adjusted afterwards.
Voltage and current are both settable. Voltage follows the chemistry - 14.6 V for 4S LiFePO4 and 12 V lead-acid absorption, 12.6 V for 3S lithium-ion - and current is dialled down when the bank, the cabling or the supply cannot take the full 180 A. Running below maximum is normal duty for this unit, not a compromise.
From roughly 400 Ah upward. Below that the current is more than the bank wants and a smaller build charges it better; the 180 A unit is for large camping banks, off-grid stores and solar backup where capacity is measured in hundreds of amp-hours.
At 180 A the cable gauge and the connector are part of the specification, not accessories. The output needs a connector rated for the current and a cable run to match. Tell us what is on the bank and we build to it.
Input 100-240 V AC. Output 14.6 V at 180 A, voltage and current adjustable. Efficiency above 88%. Protection: over-voltage, over-current, short-circuit and over-temperature.
MOQ / lead time / warranty · 1 unit · 10-15 working days · 1 year
Can it run from a standard wall socket? Not at full output on 120 V - see the input note above. Confirm the circuit first.
Is 180 A safe for a 200 Ah bank? That is a very high rate for the capacity. Turn the current down; the unit is adjustable for exactly this reason.
Does it charge lithium as well as lead-acid? Yes, at the voltage the chemistry needs - 12.6 V for 3S lithium-ion, 14.6 V for 4S LiFePO4 and 12 V lead-acid.




Other chargers built for the same battery system, from the same factory: